Standard Load cell to suit all SAPAC machines

-Drilled to suit Sapac filler. (newer style)
-Fitted with silicon dust cover.
-Prewired and tested for correct operation.

This is the newer slightly smaller style load cells adapted for use approx 1998. 
Most machines have been updated and should now be running these.
If your machine still has the larger old type you will need adaptor plates to use this

Note. It is possible that when initially installed the load cell will read weight in reverse.
All our load cells are tested after wiring and are the correct orientation.

If you machine is reading weight in reverse you will need to swap the Sig+ and Sig- wires (
usually red and white) on the digitizer card for it to read correctly